This document is a user manual for the Electrolux EEC67300L dishwasher. It provides comprehensive information on safety, product description, control panel functions, program selection, basic settings, daily use, hints and tips, care and cleaning, troubleshooting, product information, and environmental concerns.
Function Description
The Electrolux EEC67300L is a dishwasher designed for household and similar applications. Its primary function is to wash and dry dishes, cutlery, pots, and pans. The appliance features a water softener system to optimize washing results in areas with hard water, and a rinse aid dispenser to ensure streak-free drying. It offers various wash programs, including a Quick program for lightly soiled items, a 1h program, a 1h 30min program for normally soiled items, a 2h 40min program for heavily soiled items, and an ECO program for efficient energy and water consumption. The AUTO Sense program automatically adjusts the wash cycle based on the load type and soil level.
The dishwasher incorporates several features to enhance user experience and performance:
- Beam-on-Floor: A light projected onto the floor below the appliance door indicates the program status (red for running, green for complete, flashing red for malfunction).
- ECOMETER: This indicator on the control panel shows the energy and water consumption impact of the selected program.
- AirDry: This feature automatically opens the appliance door during the drying phase to improve drying results and save energy.
- Auto Off function: Automatically switches off the appliance when a program is completed or after 5 minutes of inactivity to save energy.
- Machine Care program: A dedicated program for internal cleaning to remove limescale and grease buildup.
Important Technical Specifications
- Model: EEC67300L 911434582
- Rated capacity: 13 standard place settings
- Energy efficiency class: A+++
- Energy consumption (annual): 234 kWh (based on 280 standard cleaning cycles with cold water fill)
- Energy consumption (standard cleaning cycle): 0.821 kWh
- Power consumption (off mode): 0.50 W
- Power consumption (left-on mode): 5.0 W
- Water consumption (annual): 3080 litres (based on 280 standard cleaning cycles)
- Drying efficiency class: A
- Standard cleaning cycle program time: 240 minutes (ECO program)
- Duration of left-on mode: 1 minute
- Sound power level: 44 dB(A) re 1pW
- Built-in appliance: Yes
- Dimensions (Width / height / depth): 596 / 818-898 / 550 mm
- Electrical connection:
- Voltage: 220 - 240 V
- Frequency: 50 Hz
- Water supply pressure:
- Minimum and maximum: 0.5 - 8 bar (0.05 - 0.8 MPa)
- Water supply temperature: Cold water or hot water (max 60 °C)
- Maximum load capacity: 18 kg
Usage Features
The dishwasher offers a user-friendly control panel with buttons for On/Off, Delay Start, MY TIME selection bar, EXTRAS buttons (ExtraHygiene, ExtraPower, GlassCare), and AUTO Sense.
- Program Selection: Users can select programs using the MY TIME selection bar, which allows choosing a wash cycle based on duration (30 minutes to 4 hours). The AUTO Sense button initiates a program that automatically adjusts to the load.
- EXTRAS Options:
- ExtraHygiene: Provides enhanced hygiene by maintaining a high temperature (65-70 °C) during the final rinse.
- ExtraPower: Improves washing results by increasing wash temperature and duration.
- GlassCare: Offers special care for delicate loads by reducing rapid temperature changes and limiting the wash temperature to 45 °C.
- Delay Start: Allows delaying the program start from 1 to 24 hours.
- ComfortLift Basket: This mechanism enables lifting the lower rack to the second rack level for easier loading and unloading of dishes.
- Basic Settings: Users can configure settings such as water hardness level (1L to 10L), rinse aid level (0A to 6A), end sound (On/Off), Auto door open (AirDry On/Off), key tones (On/Off), and latest program selection (On/Off). These settings are accessed via a dedicated setting mode.
Maintenance Features
Regular maintenance is crucial for optimal performance and longevity of the appliance.
- Salt Container: Needs refilling with dishwasher salt to recharge the water softener resin. The salt indicator on the display notifies when refilling is needed.
- Rinse Aid Dispenser: Needs refilling with rinse aid for effective drying. The rinse aid indicator signals when a refill is required. The dosage can be adjusted.
- Filters: The filter system (comprising a flat filter, a main filter, and a microfilter) needs regular cleaning to prevent clogging and ensure good washing results. Instructions are provided for removal, washing, and reassembly.
- Spray Arms: The lower, upper, and ceiling spray arms should be cleaned regularly to prevent soil from clogging the holes, which can lead to unsatisfactory washing results.
- Machine Care Program: A dedicated program for internal cleaning to remove limescale and grease buildup. It is recommended to use a descaler or a cleaning product specifically designed for dishwashers with this program. The Machine Care indicator illuminates when cleaning is needed.
- External Cleaning: The appliance exterior should be cleaned with a moist soft cloth and neutral detergents. Abrasive products, cleaning pads, or solvents should not be used.
- Internal Cleaning: The appliance interior, including the rubber gasket of the door, should be cleaned with a soft damp cloth. A cleaning product designed for dishwashers is recommended at least every two months.
Need help?
General
To Next Page