Consumption values
Programme
1)2)
Water (l) Energy (kWh) Duration (min)
Quick 11.0 0.620 30
Pre-rinse 5.0 0.010 15
1h 11.8 0.970 60
1h 30min 11.9 1.110 90
2h 40min 11.9 1.210 160
ECO 9.9 0.644 240
AUTO Sense 12.1 1.220 170
Machine Care 10.6 0.710 60
1)
The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of
dishes and the degree of soil can change the values.
2)
The values for programmes other than ECO are indicative only.
Information for test institutes
To receive the necessary information for
conducting performance tests (e.g. according
to: EN60436 ), send an email to:
info.test@dishwasher-production.com
In your request, include the product number
code (PNC) from the rating plate.
For any other questions regarding your
dishwasher, refer to the service book
provided with your appliance.
7. BASIC SETTINGS
You can configure the appliance by changing basic settings according to your needs.
You can also view the number of completed cycles and restore the factory defaults.
Number Setting Values
Description
1)
1 Water hardness 1L - 10L (default:
5L)
Adjust the level of the water softener according to the
water hardness in your area.
2 Rinse aid level 0A - 6A (default: 5A) Adjust the level of the rinse aid according to the nec‐
essary dosage.
3 End sound On
Off (default)
Activate or deactivate the acoustic signal for the end
of a programme.
4 Auto door open On (default)
Off
Activate or deactivate the AirDry.
5 Key tones On (default)
Off
Activate or deactivate the sound of the buttons when
pressed.
6 Latest programme
selection
On
Off (default)
Enable or disable the automatic selection of the most
recently used programme and options.
1)
For more details, refer to the information provided in this chapter.
12 ENGLISH
To Next Page
Loading...
Need help?
General
