Pro‐
gramme
Dishwasher
load
Degree of
soil
Programme phases EXTRAS
Machine
Care
For cleaning the appliance
interior. Refer to "Care and
Cleaning".
• Cleaning 70 °C
• Intermediate rinse
• Final rinse
• AirDry
1)
Not applicable
1)
Automatic door opening during the drying phase. Refer to "Basic settings".
2)
Available only through My Electrolux Kitchen app.
Consumption values
Programme
1)2)
Water (l) Energy (kWh) Duration (min)
Quick 11.0 0.620 30
Pre-rinse 5.0 0.010 15
1h 11.8 0.970 60
1h 30min 11.9 1.110 90
2h 40min 11.9 1.210 160
ECO 9.9 0.644 240
AUTO Sense 12.1 1.220 170
Machine Care 10.6 0.710 60
1)
The pressure and the temperature of the water, the variations of the mains supply, the
options, the quantity of dishes and the degree of soil can change the values.
2)
The values for programmes other than ECO are indicative only.
Information for test institutes
To receive the necessary information for
conducting performance tests (e.g.
according to: EN60436 ), send an email
to:
info.test@dishwasher-production.com
In your request, include the product
number code (PNC) from the rating plate.
For any other questions regarding your
dishwasher, refer to the service book
provided with your appliance.
6. BASIC SETTINGS
You can configure the appliance by changing basic settings according to your needs.
You can also view the number of completed cycles and restore the factory defaults.
Number Setting Values
Description
1)
1 Water hard‐
ness
1L - 10L (de‐
fault: 5L)
Adjust the level of the water softener ac‐
cording to the water hardness in your
area.
ENGLISH 11
To Next Page
Loading...
Need help?
General
