The upper ends of the two
vertical ribs inside the
compartment (B) indicate
the maximum level for filling
the dispenser with gel (max.
30ml).
9.2 Remote start
Activate this function to remotely control
and monitor your dishwasher in My
Electrolux Kitchen app.
How to activate the remote start
Make sure that the indicator is
on and your dishwasher is added in My
Electrolux Kitchen app. If not, refer to
"Wireless connection".
1. Press .
• The light related to the button is
on.
• The display shows APP.
2. Close the appliance door.
3. Use My Electrolux Kitchen app to
remotely operate the appliance.
Opening the door
deactivates the remote start.
Refer to the information
provided further in this
chapter.
How to deactivate the remote
start
Press until the display shows 0h.
• The light related to the button is
off.
• The appliance returns to the
programme selection.
9.3 How to select and start a
programme using MY TIME
selection bar
1. Slide your finger across MY TIME
selection bar to choose a suitable
programme.
• The light related to the selected
programme is on.
• The ECOMETER indicates the
level of energy and water
consumption.
• The display shows the
programme duration.
2. Activate applicable EXTRAS if
desired.
3. Close the appliance door to start the
programme.
9.4 How to select and start the
programme Pre-rinse
1. To select Pre-rinse, press and
hold for 3 seconds.
• The light related to the button is
on.
• The ECOMETER is off.
• The display shows the
programme duration.
2. Close the appliance door to start the
programme.
9.5 How to activate EXTRAS
1. Select a programme using MY TIME
selection bar.
2. Press the button dedicated to the
option you want to activate.
• The light related to the button is
on.
• The display shows the updated
programme duration.
• The ECOMETER indicates the
updated level of energy and water
consumption.
By default, options must be
activated every time before
you start a programme.
If the latest programme
selection is enabled, the
saved options are activated
automatically along with the
programme.
It is not possible to activate
or deactivate options while a
programme is running.
Not all options are
compatible with each other.
ENGLISH 19
To Next Page
Loading...
