Electrolux EES200E/5503S - Beverage Reheating and Maintenance; Reheating Drinks with Steam; Cleaning and Maintenance Guide

11
Reheating beverages
• Pushthehot-water/steamselectorbuttonin.
• Insertthesteamnozzleintotheliquidtobereheatedandturntheoperatingdial
to the position.
• Oncetheliquidhasreachedthedesiredtemperatureturntheoperatingdialback
to its neutral position.
• Whensteamisnolongerneeded,releasetheselectorbuttonagain.
Care and Cleaning
• Beforecleaningtheespressomaker,ensureitisdisconnectedfromthepower
supply and has cooled down completely.
• Toavoidtheriskofelectricshock,donotcleantheappliancewithwateranddo
not immerse it in water.
• Donotuseabrasivesorharshcleaningsolutions.
• Beforecleaningtheappliance,andalsointhecaseoftheapplianceremaining
unused for an extended period of time, the remaining water in the container
should be drained completely. The water container should be thoroughly rinsed at
regular intervals.
• Thesteamnozzlemustbecleanedimmediatelyafterthefrothingprocess.Wiping
the nozzle with a wet cloth should suffice.
• Ifthesteamnozzlebecomesblocked,proceedasfollows:
* Pull the milk frother o the steam nozzle.
* Unscrewthenozzlefromthesteamtube,usingthemeasuringscoopasa
tool.
* Insert a ne pin or needle into the steam nozzle to remove the blockage.
* Screw the steam nozzle back onto the tube.
* Push the milk frother back onto the nozzle.
• Allremovablepartsmaybecleanedwithwarm,soapywater.
• Alwaysemptythedriptrayingoodtime.Trayanddrainermaybecleanedwith
warm, soapy water.
• Theexteriorhousingmaybewipedwithadryorslightlydamp,lint-freecloth.
• Theboileroutletmaybewipedwithamoistcloth.
• Thegasketareaaroundtheboileroutlet(atthebayonetlockingsocket)shouldbe
cleanedusingabrush.Ahardbrushisrecommended.
EN