51
The freestanding type installation requires four screw-
in feet to be installed before it can be fitted in between
cabinets, with cabinets on one side or without adjacent
cabinets. There is no clearance requirement to adjacent
side cabinets.
To ensure cooker’s stability, the anti-tilt brackets must
be installed.
Freestanding installation
Four screw-in feets are supplied with the appliance and
can be found in the accessories pack in the oven.
Freestanding models are supplied with a clip-on kick panel.
INSTALLATION OF EFE914, EFEP916 & EFEP956 (CONTINUED)
Cabinet construction for freestanding installation
9
00mm NO
M
755mm NOM
900mm minimum
600mm
both sides
To Next Page
Loading...
