To Next Page
J
Jonathan LewisAug 8, 2025
What to do if the Electrolux Hob flame extinguishes immediately after ignition?
- CcrollinsAug 8, 2025
If the flame extinguishes immediately after ignition on your Electrolux Hob, there are several potential causes. First, check if the hob is correctly connected to the electrical supply. Also, make sure the burner cap and crown are placed correctly. Another possibility is that the thermocouple is not heated up sufficiently; after lighting the flame, keep the knob pushed for equal or less than 10 seconds. Finally, the injector could be blocked, while the burner crown is clean; ensure the injector is not blocked and the burner crown is clean.
General
