11
NOTE
to Prime the Water Supply System” for important
information about priming an empty water supply
system.
several tubing lines, a water filter, a water valve
and a water tank. To ensure that your water
dispenser works properly, this system must be
completely filled with water when your refrigerator
is first connected to the household water supply
line.
Connecting The Water Supply
7
rear panel with a steel clamp and screw (see
illustration).
8 Coil the excess copper tubing (about 2½
turns) behind your refrigerator as shown.
wear against other surfaces.
9 Open water supply shut-off valve and tighten
any connections that leak.
To Next Page
Loading...
