English
GETTING THE BEST RESULTS
Use the nozzles as follows:
Rugs: Us e the rug/hard floor nozzle with the lever in posi-
tion (1). Reduce suction power for small rugs.
Hard floors: Use the rug/hard floor nozzle with the lever
in position (2).
Upholstered furniture: Use the combination nozzle as
shown in (3).
Curtains, lightweight fabrics, etc.: Use the combination
nozzle as shown in (3). Reduce suction power if necessary.
Frames, bookshelves, etc.: Use the combination nozzle
as shown in (4).
Crevices, corners, etc.: Use the crevice nozzle (5).
Using the turbo nozzle
6 Attach the nozzle to the tube.
Note: Do not use the turbo nozzle on skin rugs, rugs with long
fringes or a pile depth exceeding 1/2". To avoid damaging the
rug, do not keep the nozzle stationary while the brush is rotat-
ing. Do not pass the nozzle across electric cables, and be sure to
switch off the vacuum cleaner immediately after use.
To Next Page
Loading...
