Electrolux ENG7TE75S - Page 15

3. Pull the drawer out while lifting it up and
detach it from the rails.
2
1
4. Push the rails inside the cabinet to avoid
damage to the appliance when closing
the door.
To reassemble:
1. Pull out the rails completely.
2. Place the rear part of the drawer on the
rails.
1
2
3. Keep the front of the drawer lifted up
while pushing the drawer in.
4. Press the front part of the drawer
downwards.
Pull out the drawer again and check if it
is placed correctly on both rear and front
hooks.
To remove the glass shelf:
1. Unlock lateral gripping from both sides
simultaneously.
2
x2
1
ENGLISH 15