Electrolux ENN2801EOW - Page 16

4 mm
44 mm
7. Attach the appliance to the niche with
4 screws.
I
I
8. Remove the correct part from the
hinge cover (E). Make sure to remove
the part DX, in the case of right hinge,
SX in opposite case.
9. Attach the covers (C, D) to the lugs
and the hinge holes.
E
E
B
D
C
10. Install the vent grille (B).
11. Attach the hinge covers (E) to the
hinge.
12. Connect the appliance laterally to the
kitchen furniture sidewall.
13. Loosen the screws of the part (G) and
move the part (G) till the furniture
sidewall.
www.electrolux.com16