8
AFTER USE
Wind the flexible tube hose (26) around the cleaner body (Fig N) and set safety slider (23) back to the lock position. Replace
the gun on the handle provided. Or, leave the floor brush (13) and extension tubes (11) attached to the flexible tube (26) and
store it like this by inserting the hook located on the back of the brush (13) in the hole provided behind the cable winder
cavity, as shown in figure (L). Rewind the power cable and plug (5) into the into the cable winder cavity (fig. M).
IF YOU HAVE ANY FAULTS, QUESTIONS OR PROBLEMS, PLEASE CONTACT:
ELECTROLUX CUSTOMER CARE
TEL. 08706 055 055
FAX 01582 588380
E-MAIL: electrolux.floorcare@electrolux.co.uk
To Next Page
Loading...
Need help?
General
