Accessories
Clean all accessories after each use and let them dry. Use a soft
cloth with warm water and a cleaning agent. Do not clean the acces‐
sories in a dishwasher.
Do not clean the non-stick accessories using aggressive agents,
sharp-edged objects or in a dishwasher.
13.2 Stainless steel or
aluminium ovens
Clean the oven door with a damp cloth or
sponge only. Dry it with a soft cloth.
Do not use steel wool, acids or abrasive
materials as they can damage the oven
surface. Clean the oven control panel
with the same precautions.
13.3 How to remove: shelf
supports
To clean the oven, remove the shelf
supports.
CAUTION!
Be careful when you remove
the shelf supports.
1. Pull the front of the shelf support
away from the side wall.
2. Pull the rear end of the shelf support
away from the side wall and remove
it.
Install the removed accessories in the
opposite sequence.
The retaining pins on the
telescopic runners must
point to the front.
13.4 Pyrolysis
CAUTION!
If there are other appliances
installed in the same
cabinet, do not use them at
the same time as the
function: Pyrolysis. It can
cause damage to the
appliance.
The cleaning cannot start:
• if the core temperature sensor is not
removed.
• if the oven door are not closed.
1. Remove all accessories and
removable shelf supports.
2. Clean the oven cavity with warm
water and mild detergent. Clean the
inner door glass with warm water and
soft cloth.
3. Turn on the oven.
4. Enter the Menu and select the
function: Pyrolysis. Press
.
5. Set the duration of the cleaning:
Option Description
Quick For a light
cleaning: 1 h.
Normal For a stand‐
ard cleaning:
1 h 30 min.
Intense For a thor‐
ough clean‐
ing: 2 h 30
min.
6. Press .
www.electrolux.com36
To Next Page
Loading...
