28
electrolux
care and cleaning
Replacing an oven light bulb
The type of bulb required is a 300°C 25
watt small Edison Screw.
Disconnect the appliance from the
electricity supply before replacing
the bulb.
1.
Make sure the appliance is cool
before replacing the bulb.
2.
Open the oven door and remove
the shelves and wirework runners.
3.
Pull the glass bulb cover towards
you and then pull it off. If necessary,
use a screwdriver to carefully lever
off the cover, taking care not to
damage the oven cavity.
4.
Unscrew the bulb by turning it to
the left.
5.
Fit a new bulb and then replace the
glass bulb cover.
6.
Refit the wirework runners and
replace the shelves.
7.
Restore the electricity supply.
To Next Page
Loading...
