3. Pull the bypass cartridge outwards,
grasping the lower part, until the water
bypass cartridge is automatically ejec-
ted.
4. Remove the protective wrapping of the
new water filter and insert the new filter
firmly into the filter connection.
5. Push the water filter back to its original
position.
6. Remove cloth or towel and make sure
that spilled water is wiped off.
7. Close the hatch and remount the interi-
or.
8. Keep the bypass cartridge for future
use.
9. Unlock the water dispenser. Refer to
"Child lock functions". Select plain wa-
ter and dispense about 2 litres of water.
There may be some air to start with.
Installation of the gas cylinder
1. Remove the gas cylinder wrapping and
screw on the adapter to the gas cylin-
der. Tighten by hand only.
electrolux 17
To Next Page
Loading...
