8.4 Electrical connection
Before plugging in, ensure that the volt-
age and frequency shown on the rating
plate correspond to your domestic power
supply.
The appliance must be earthed. The pow-
er supply cable plug is provided with a
contact for this purpose. If the domestic
power supply socket is not earthed, con-
nect the appliance to a separate earth in
compliance with current regulations, con-
sulting a qualified electrician.
The manufacturer declines all responsibili-
ty if the above safety precautions are not
observed.
This appliance complies with the E.E.C.
Directives.
8.5 Levelling
Accurate levelling prevents the vibration
and noise of the appliance during opera-
tion. To adjust the height of the appliance
loosen or tighten the two adjustable front
feet.
8.6 Door reversibility
To carry out the following opera-
tions, we suggest that this be
made with another person that will
keep a firm hold on the doors of
the appliance during the opera-
tions.
To change the opening direction of the
door, do these steps:
• Remove the plug from the power sock-
et.
• Unscrew the upper pin and screw it on
the opposite side.
• Remove the door.
A
C
B
• Remove the plinth .
• Remove the cap (A) and position it on
the opposite side.
• Unscrew the lower hinge (C) and the
washers (B)
• Position the pin and the washers on the
opposite side .
28
www.electrolux.com
To Next Page
Loading...
