DOOR REVERSIBILITY
To carry out the following opera-
tions, we suggest that this be
made with another person that will
keep a firm hold on the doors of
the appliance during the opera-
tions.
To change the opening direction of the
door, do these steps:
• Remove the plug from the power socket.
• Tilt back the appliance carefully so that
the compressor cannot touch the floor.
• Unscrew the left foot.
• Unscrew the screws of the door bottom
hinge. Remove the hinge. Put over the
pin in the direction of the arrow.
• Unscrew and install the screw on the op-
posite side.
• Install the hinge on the opposite side.
• Screw the right foot.
• Unscrew both screws on the rear side.
• Push back the top and lift it from the fix-
ing elements.
ENGLISH 33
To Next Page
Loading...
