- 15 -
Installation instructions
Any electrical work required to install this appliance,
should be carried out by a qualified electrician or
competent person.
A
ny plumbing work required to install this appliance,
should be carried out by a qualified plumber or
c
ompetent person.
Technical specifications
Capacity: 6 place settings accordance EN 50242
Dimensions: Height 447 mm
Width 546 mm
Depth (to the edge of the door) 480 mm
Depth (to the middle of the door) 490 mm
Weight: Net 22 kg
Water pressures: Minimum 80 kPa (0,8 bar)
Maximum 1000 kPa (10 bar)
Water temperature: Cold water fill only
Electrical data: Power supply 230 V - 50 Hz
Fuse 13 A
Heating element 1000 W
Power rating 1080 W
To Next Page
Loading...
