27
The control panel
ON/OFF button
Function buttons
Programme selection
buttons
Indicator lights
1
2
3
Digital idisplay
3 IN 1
option button
Delay start
option button
Function buttons: in addition to the dishwashing
programme selected, the following functions can also be set
with the help of these buttons:
- water softener setting,
- deactivation/activation of the inflow of rinse aid,
- the cancelling of a programme in progress.
Programme selection push buttons: the selection of
a washing programme occurs by pressing one of these
buttons.
The digital display indicates:
- the level of hardness to which the water softener is set
- if the rinse aid inflow is activated/deactivated
- the approximative remaining time of the running programme
- the countdown of the delay start
- fault codes concerning malfunction of the dishwasher
"Delay start" option button : this option allows
the start of the programme to be delayed from 1 to 19 hours.
Indicator lights: have the following meanings:
The salt and rinse aid indicator lights are never illuminated
while a washing programme is running even if filling with salt
and rinse aid is necessary.
"3 IN 1" function button : this appliance is
equipped with the function 3 IN 1, that allows the use of the "3
in 1" combi detergent tablets.
This function can be selected with all washing programmes.
With the selection of this function the inflow of rinse aid and
salt from each respective supply container is automatically
deactivated and also the indicator lights for salt and rinse aid
are deactivated.
Once selected this function (button indicator light illuminated )
it will remain active also for the following washing programmes,
to deactivate the function, press the button (button indicator
light off).
salt refilling indicator light, illuminates when the salt
has run out
rinse aid refilling indicator light, illuminates when
the rinse aid has run out
Programme in progress: illuminates when a
washing programme has been setted and remains
illuminated for all the duration of the washing
programme.
Turns off when the washing programme has ended.
When senarelagd start has been setted, this
indicator light turns off and will come on again once
the countdown has elapsed and the washing
programme has started.
To Next Page
Loading...
