Function push button 3 in 1: This appliance is
equipped with the option 3 in 1, that allows the use of the "3 in
1" combi detergent tablets.
This function can be selected with all washing programmes.
With the selection of this function the inflow of rinse aid and
salt from each respective supply container is automatically
deactivated and also the indicator lights for salt and rinse aid
are deactivated.
Once selected this option (push button indicator light
illuminated ) it will remain active also for the following washing
programmes, to deactivate the function, press the push button
(push button indicator light off).
Indicator lights: have the following meanings:
Audible signals
Audible signals have been introduced to help indicate which
operations the dishwasher is performing:
- Setting of the water softener
- End of programme
- Something not working with the machine
Deactivation/activation of the audible signals
(The dishwasher must be switched off)
Factory setting: audible signals activated
1. Press the On/Off push button. All programme selection push
buttons indicator lights will illuminate (setting mode).
If only one programme selection push button indicator light
is illuminated, this means that a washing programme has
been set. The programme must be cancelled: press
simultaneously the function push buttons 2 and 3 for about
2 seconds, the indicator light of the set programme push
button starts flashing for about 2 seconds. After about 2
seconds the indicator lights of all the programme selection
push buttons will illuminate indicating that the set
programme has been cancelled and that the machine is
now in setting mode.
2. Press simultaneously function push buttons 2 and 3, the
indicator lights of the function push buttons 1, 2 and 3 start
flashing.
3. Press the function push button 3, the indicator lights of
function push buttons 1 and 2 turn off while the indicator
light of the push button 3 goes on flashing, the digital
display indicates the current setting.
4. To change the current setting, press again the function
push button 3, the digital display will indicate the new
setting.
5. To memorise the operation, switch off the dishwasher by
pressing the On/Off push button or wait about 60 seconds
after which the dishwasher will automatically return to
setting mode.
28
salt refilling indicator light, illuminates when the salt
has run out and needs replenishing.
rinse aid refilling indicator light, illuminates when
the rinse aid has run out and needs replenishing.
Audible signals deactivated
Audible signals activated (factory set)
To Next Page
Loading...
