Electronic adjustment
1. Press the on/off button to activate the
appliance.
2.
Do the Reset function.
3. Press and hold, at the same time,
and until the ,
and indicators start
to flash.
4.
Press
.
•
The and indica-
tors go off.
•
The
indicator continues to
flash.
• The acoustic signals operate. E.g.
five intermittent acoustic signals =
level 5.
• The display shows the setting of the
water softener. E.g.
= level 5.
5.
Press
again and again to change
the setting.
6.
Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
6.2 Filling the salt container
1.
Turn the cap counterclockwise and
open the salt container.
2.
Put 1 litre of water in the salt contain-
er (only for the first time).
3.
Fill the salt container with dishwasher
salt.
4.
Remove the salt around the opening
of the salt container.
5.
Turn the cap clockwise to close the
salt container.
CAUTION!
Water and salt can come out from
the salt container when you fill it.
Risk of corrosion. To prevent it,
after you fill the salt container,
start a programme.
ENGLISH 25
Downloaded from www.vandenborre.be
To Next Page