18 ERROR CODES AND ALARMS
ERROR CODES & ALARMS
ERROR CODE WHAT IT MEANS… WHAT TO DO…
Communication Error If you see this icon displayed (electronic
display models) or the top temperature icon
is flashing it means that the control has lost
contact with the main control board.
The appliance will operate at its last known
setting, all auxillary functions will not work.
Turn the unit off at the power
point for 5 minutes and then turn it
back on.
Under most circumstances this will
reset the display enabling normal
function to continue.
If the error re-occurs then call
for service.
Sensor – Open Circuit /
Short Circuit
If you see this icon displayed (electronic
display models) or any combination of the
second and fourth temperature icons are
flashing it means that an error has been
detected on a sensor.
The refrigerator will run in a default cycle to
prevent food spoilage.
Call for service.
ALARM ICON WHAT IT MEANS OPERATION
Freezer Temperature Alarm
Activates if the freezer temperature is 10°c
over set temperature for a period of 50
minutes (except during a defrost).
An alarm will sound the temperature icons
will flash.
• To deactivate the alarm for 50
minutes press any button.
• To deactivate alarm for 12 hrs on the
ice & water model press and hold
Select Mode for 10 seconds for non
ice and water models press and hold
any button for 10 seconds.
Non Electronic
Display
Door Alarm
Activates if the refrigerator or freezer doors
are left open for longer than 2 minutes.
An alarm will sound and the affected
compartment icon will flash and the
temperature and icons will fade on and off.
• Alarm will sound and icon will flash
indicating which door is open.
(Ice & water models)
• To silence the alarm for 8 minutes
while the door is open press any
button (the icons will continue to flash
until door is closed).
Alarms
Error codes
Non Electronic
Display
Non Electronic
Display
Non Electronic
Display
To Next Page
Loading...
Need help?
General
