DOC. NO. 5956.65J.00 P. 5 / 174
EFS - Dishwashing Systems Platform
Electrolux Professional
1.2 UNDERCOUNTER Style
SETTING MODES:
To enter into one setting mode (Figure 12), (Figure 13) the appliance should be in stand-by: switch on the
appliance, no cycles selected. Is useful keep door open to avoid start cycle in case of not simultaneously pres-
sure of the two keys.
Fig. 9 Detergent dispenser Manual
Activation
Fig. 10 Rinse Aid Dispenser
Manual Activation
Fig. 11 Rinse Pump Manual
Activation (used to EMPTY BOILER)
Fig. 12 Enter into General
Parameters (Hold down buttons for
at least five seconds).
Fig. 13 Enter into Factory
Parameters (Hold down buttons for
at least five seconds).
Fig. 14 Next Parameter Family OR
Increase Parameter Value (in setting
mode only)
Fig. 15 Decrease Parameter Value
(In setting mode only)
Fig. 16 Confirm Value and go to
next Parameter (in setting mode
only).
To Next Page
Loading...
Need help?
General
