22
GG CCOOMMMMIISSSSIIOONNIINNGG
GG..11 PPrreelliimmiinnaarryy cchheecckkss,, aaddjjuussttmmeennttss aanndd
ooppeerraattiioonnaall tteessttss
WWAARRNNIINNGG
These operations must only
be carried out by specialized
technicians provided with
adequate personal
protection equipment (e.g.
safety footwear, gloves,
glasses, etc.), tools and
suitable ancillary equipment
with the appliance switched
off and cold.
Electrical and plumbing checks
Before starting the machine:
• check correct connection of the electrical wires that feed
the machine;
• make sure the power supply voltage and frequency match
the data given in the technical data table (D.1
Main
technical characteristics
);
• check correct connection of the water supply and drain
pipes (see paragraph F.6
Plumbing connections
);
• make sure all the guards, safety devices and emergency
switches are in place and efficient.
Check the positioning of tank components
• Make sure that, the overflow “A“, the tank filter “B“, and the
flat filters “C“ are correctly fitted.
• Make sure the upper and lower wash and rinse arms are
correctly fitted.
To Next Page
Loading...
