Electrolux EUF2742AOW - Page 7

After a power failure the set tem-
perature remains stored.
3.5 EcoMode
For optimal food storage select the Eco-
Mode .
To switch on the function:
1.
Press the Mode button until the cor-
responding icon appears.
The EcoMode indicator flashes for
few seconds.
The temperature indicator shows the
set temperature:
– for the freezer: -18°C
The EcoMode indicator is shown.
To switch off the function:
1.
Press the Mode button until the Eco-
Mode indicator flashes.
2.
The EcoMode indicator goes off.
The function switches off by se-
lecting a different set temperature.
3.6 ActionFreeze mode
To switch on the function:
1.
Press the Mode button until the cor-
responding icon appears.
The ActionFreeze indicator flashes for
few seconds.
This function stops automatically after 52
hours.
To switch off the function before its auto-
matic end:
1.
Press the Mode button until the Ac-
tionFreeze indicator flashes.
2.
The ActionFreeze indicator goes off.
The function switches off by se-
lecting a different freezer set tem-
perature.
3.7 DrinksChill mode
The DrinksChill mode is to be used to set
an acoustic alarm at the preferred time,
useful for example when a recipe requires
to cool down a mixture for a certain peri-
od of time, or when a reminder is needed
in order not to forget the bottles placed in
the freezer for fast cooling.
To switch on the function:
1.
Press the DrinkChill button.
The DrinksChill indicator appears.
The Timer shows the set value (30 mi-
nutes).
2.
Press the Temperature colder button
and Temperature warmer button to
change the Timer set value from 1 to
90 minutes.
3.
The Timer start to flash (min).
At the end of the countdown the Drinks-
Chill indicator flashes and an audible
alarm sounds:
1.
Remove any drinks contained in the
freezer compartment.
2.
Press the DrinkChill button to switch
off the sound and terminate the func-
tion.
It is possible to deactivate the function at
any time during the countdown:
1.
Press the DrinkChill button.
2.
The DrinksChill indicator goes off.
It is possible to change the time during
the countdown and at the end by press-
ing the Temperature colder button and
the Temperature warmer button.
3.8 High temperature alarm
Temperature increase in the freezer com-
partment (for example due to an earlier
power failure or door is open) is indicated
by:
• flashing the alarm and freezer tempera-
ture indicators
• sounding of buzzer.
To reset the alarm:
1.
Press any button.
2.
The buzzer switches off.
3.
The freezer temperature indicator
shows the highest temperature
reached for a few seconds. Then
show again the set temperature.
4.
The alarm indicator continue to flash
until the normal conditions are re-
stored.
3.9 Door open alarm
An acoustic alarm will sound if the door is
left open for a few minutes. The door
open alarm conditions are indicated by:
• flashing alarm indicator
• acoustic buzzer.
When normal conditions are restored
(door closed), the alarm will stop.
ENGLISH 7