34
4. Select the temperature
Turn the dial to the required setting.
5. Select the required option(s)
Depress button and/or and select the spin
speed or option or
.
.
6. Select the programme and start
the machine
Turn the programme selector dial clockwise to the
required programme and press the ON/OFF
button : the mains on light comes on and the
machine starts to operate.
Operating sequence
Before washing your first load of laundry, we
recommend that you run a cotton cycle at 60°C, with
the machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1. Place the laundry in the drum
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent recommended by the
manufacturer in a graduated cup and pour it into the
main wash compartment .
If you wish to carry out a programme with prewash,
pour detergent into the appropriate compartment
marked .
3. Measure out the additives
If required, pour fabric softener into the compartment
marked , and bleach into the compartment
marked without exceeding the «MAX» mark.
To Next Page
Loading...
Need help?
General
