EasyManua.ls Logo

Electrolux EW2W3068E3 - Starting a Programme with the Delay Start; Interrupting a Programme and Changing Options; Cancelling a Running Programme

Electrolux EW2W3068E3
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The indicator starts to flash
on the display.
The programme starts, the door
locks, the display shows the
indicator .
If the indicator
flashes, the door is
locking. If the display
shows an alarm
message after the
indicator has
flashed for a few
seconds, it indicates
that the door is not
properly locked (for
more details see
Troubleshooting
chapter).
The drain pump can operate for a
short time when the appliance fills
water.
After approximately 15
minutes from the start of the
programme:
The appliance adjusts
automatically the
programme duration
agree with the laundry
load.
The display shows the
new value.
12.8 Starting a programme with
the delay start
1. Press Delay Start again and again
until the display shows the delay you
want to set.
The related indicator comes on the
display.
2. Press :
The appliance starts the
countdown.
The door locks, the display shows
the indicator .
If the indicator
flashes, the
door is locking. If the display
shows an alarm message after
the indicator has flashed for a
few seconds, it indicates that the
door is not properly locked (for
more details see Troubleshooting
chapter).
When the countdown is
completed, the programme starts
automatically.
You can cancel or change
the set of the delay start
before you press the . To
cancel the delay start:
Press to set the
appliance to pause.
Press Delay Start
until the display
shows '.
Press
again to
start the programme
immediately.
12.9 Interrupting a programme
and changing the options
You can change only some options
before they operate.
1. Press .
The indicator flashes.
2. Change the options.
3. Press
again.
The programme continues.
12.10 Cancelling a running
programme
1. Press the button for some
seconds to cancel the programme
and to deactivate the appliance.
2. Press the same button again to
activate the appliance. Now, you can
set a new washing programme.
Before starting the new
programme the appliance
could drain the water. In this
case, make sure that the
detergent is still in the
detergent compartment, if
not fill the detergent again.
www.electrolux.com26

Other manuals for Electrolux EW2W3068E3

Related product manuals