What to do if my Electrolux EWW12832 does not start?
If your Electrolux Washer/Dryer isn't starting, make sure the door is firmly closed. Check that the plug is properly inserted into the power socket and that there is power at the socket. Also, ensure you've pressed the Start/Pause button and that the delay start function is not active. If delay start is selected, cancel it to start the wash immediately.
Why is there water on the floor near my Electrolux EWW12832?
If you find water on the floor near your Electrolux Washer/Dryer, it could be due to several reasons. You might be using too much detergent or an unsuitable type that creates excessive foam. Check the water inlet hose connection for leaks. Also, inspect the drain hose for any damage; if damaged, replace it.
How to reduce vibration and noise in my Electrolux Washer/Dryer?
Excessive vibration and noise in your Electrolux Washer/Dryer can be caused by a few things. Ensure the transit bolts and packing have been removed and that the support feet are properly adjusted to level the appliance. An uneven distribution of laundry in the drum can also cause this issue; pause the machine and redistribute the load manually. If there's very little laundry, adding more could help. Also, detergent overdose can cause noise and vibrations, so reduce the detergent quantity or use another one.
What to do if the door of my Electrolux Washer/Dryer will not open?
If the door of your Electrolux Washer/Dryer won't open, it could be because the program is still running; wait until the end of the washing cycle. The door lock may not have released yet, so wait about 5 minutes. If there's water in the drum, select the ‘Spin’ program to empty it out.
Why does spinning start late or not at all in my Electrolux EWW12832 Washer/Dryer?
If spinning starts late or not at all in your Electrolux Washer/Dryer, the electronic unbalance detection device may have activated because the laundry isn't evenly distributed in the drum. Pause the machine and redistribute the laundry manually.
Why won't my Electrolux EWW12832 Washer/Dryer fill with water?
If your Electrolux Washer/Dryer isn't filling with water, first check that the water tap is open. Inspect the inlet hose to ensure it's not squashed or kinked, and clean the water inlet hose filter if it's blocked. Also, make sure the door is properly closed.
Why are the washing results unsatisfactory with my Electrolux EWW12832 Washer/Dryer?
Unsatisfactory washing results with your Electrolux Washer/Dryer may occur if you're using too little or an unsuitable detergent; try increasing the detergent quantity or using a different one. Stubborn stains should be treated prior to washing with commercial stain removers. Ensure you've selected the correct temperature for the load and avoid excessive laundry loads.
Why does my Electrolux EWW12832 fill with water and then empty immediately?
If your Electrolux Washer/Dryer fills with water and then empties immediately, check the drain hose connection to ensure it is not squashed or kinked. Clean the drain filter in case the drain pump is clogged. Also, make sure that the ‘Rinse Hold’ or ‘No Spin’ option is disabled, or select a spin program. If the laundry is not evenly distributed in the drum, pause the machine and redistribute it.
What causes unusual noises from my Electrolux EWW12832 Washer/Dryer?
Unusual noises from your Electrolux Washer/Dryer can stem from improper installation, so ensure the appliance is correctly leveled. Also, verify that the transit bolts and packaging have been removed. The load may be too small, so add more laundry to the drum.
Why is the cycle time longer than displayed on my Electrolux EWW12832?
If the cycle time is longer than displayed on your Electrolux Washer/Dryer, it could be due to machine unbalance. Try redistributing the laundry manually in the drum and starting the spin phase again.
General safety precautions for appliance operation and maintenance.
Safety guidelines for proper installation and safe usage of the appliance.
Details safety precautions to protect children from appliance hazards.
Identifies and labels all the parts and features of the washing machine.
Lists the accessories that come with the appliance.
Explains the functions of the On/Off button, Program Knob, and various touchpads.
Details the meaning of the display screen and various indicator lights.
Overviews washing/drying programs, load capacities, and provides drying guides.
Step-by-step guide for preparing the appliance before its first wash cycle.
Instructions for using the combined wash and dry cycle.
How to perform washing cycles followed by automatic drying.
Instructions for washing cycles combined with manually set drying times.
Explains how to select automatic dryness levels for laundry.
How to set specific drying times for the appliance.
Tips for sorting laundry, selecting temperatures, and preparing items for washing.
Guidance on treating stains and choosing appropriate detergents and additives.
Advice on determining the correct amount of detergent to use.
Instructions for cleaning the exterior, dispenser drawer, and drawer recess.
How to clean the drain pump and water inlet filter for optimal performance.
Precautions to take to prevent appliance damage from freezing conditions.
A guide to identify and resolve common malfunctions with the washing machine.
Steps for unpacking the appliance and removing transit packaging.
Guidelines for correctly positioning the appliance and making water/electrical connections.
Information on recycling packaging materials and disposing of old appliances.
Recommendations for environmentally friendly operation of the washing machine.
General| Brand | Electrolux |
|---|---|
| Model | EWW12832 |
| Category | Washer/Dryer |
| Language | English |
To Next Page