EasyManua.ls Logo

Electrolux EW6F429BC - Page 20

Electrolux EW6F429BC
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Make sure that the flap does not cause a
blockage when you close the drawer.
10.5 Setting a programme
1. Turn the programme dial to select the
desired washing programme.
The indicator of the Start/Pauza
button flashes.
The display shows an indicative
programme duration.
2. To change the temperature and/or
the spin speed, touch the related
buttons.
3. If desired, set one or more options by
touching the related buttons. The
related indicators illuminate on the
display and the given information
changes accordingly.
If a selection is not possible
an acoustic signal sounds.
10.6 Starting a programme
Touch the Start/Pauza button to start
the programme.
The related indicator stops flashing and
stays on.
The programme starts, the door is
locked. The display shows the indicator
.
The drain pump can operate
shortly before the appliance
fills water.
10.7 Starting a programme with
the delay start
1. Touch the Odložený start button
repeatedly until the display shows the
desired delay time. On the display the
indicator shows
2. Touch the Start/Pauza button. The
appliance door locks and starts the
countdown of the delay start. The display
shows the indicator .
When the countdown is completed, the
programme starts automatically.
Cancelling the delay start after
the countdown has started
To cancel the delay start:
1. Touch the Odložený start button
repeatedly until the display shows the
desired delay time. On the display
the indicator shows
Touch the Start/Pauza button. The
appliance lock the door and starts the
countdown of the delay start. The display
shows the indicator
.
When the countdown is completed, the
programme starts automatically.
2. Touch the Start/Pauza button to
pause the appliance. The related
indicator flashes.
3. Touch the Odložený start button
repeatedly until the display shows
and the indicator goes off.
4. Touch the Start/Pauza button
again to start the programme
immediately.
Changing the delay start after
the countdown has started
To change the delay start:
1. Touch the Start/Pauza button to
pause the appliance. The related
indicator flashes.
2. Touch the Odložený start button
repeatedly until the display shows the
desired delay time.
3. Touch the Start/Pauza button
again to start the new countdown.
www.electrolux.com20

Related product manuals