Electrolux EW6SN347SI - Installation; Unpacking Instructions

Level of protection against ingress of solid parti‐
cles and moisture ensured by the protective cov‐
er, except where the low voltage equipment has
no protection against moisture
IPX4
Water supply pressure Minimum
Maximum
0.5 bar (0.05 MPa)
10 bar (1.0 MPa)
Water supply
1)
Cold water
Maximum Load Cotton 7 kg
Spin Speed Maximum spin speed 1351 rpm
1)
Connect the water inlet hose to a water tap with a 3/4'' thread.
5. INSTALLATION
WARNING!
Refer to Safety chapters.
5.1 Unpacking
1. Remove the external film. If
necessary, use a cutter.
2. Remove the cardboard top and the
polystyrene packaging materials.
3. Open the door. Remove all the items
from the drum.
Montagea
nweisun
g
Achtung! Lesen Sie vor Beginn de
r Installation die
Sicherheitshinweise
in der Gebrauchsanweisung.
I
nstallation Instruction
Warning!
t
h
e safety information in t
h
e User Manual.
Montageanweisung
Achtung! Lesen Sie vor
Be
ginn
d
er In
stallation die
Sicherheitshinweise in der Gebrauchsanweisung.
Instal
la
tion
Instruction
Warning!
the saf
e
t
y informa
t
ion in the User
Manual.
Montageanweisun
g
Achtung! Lesen Sie vor Beginn
d
er I
n
stallation
d
ie
Sicherheitshinweise in der Gebrauchsanweisung.
Ins
tallation Instruction
Warning!
the safety informat
ion in the Use
r
Manual.
Montageanweisung
Achtung
! Lesen Si
e
vo
r Beginn der Installation die
Sicherheit
shinweise in der Gebrauchsanweisung.
Installation Instruction
War
ning!
t
he safety information in the User Man
ual.
4. Put the front polystyrene packaging
element on the floor behind the
appliance. Carefully put down the
appliance onto its rear side.
5. Remove the polystyrene protection
from the bottom.
www.electrolux.com8