3. With a suitable spanner unscrew and re-
move the three screws and their spacers
on machine's rear.
4. The three holes must then be plugged
with the plastic plug caps supplied in the
bag containing the instruction booklet,
which can be found inside the drum.
Positioning
Install the machine on a flat hard floor. Make
sure that air circulation around the machine
is not impeded by carpets, rugs etc. Check
that the machine does not touch the wall or
furniture. Level the washing machine by rais-
ing or lowering the two front feet. If necessa-
ry, check the setting with a spirit level. Any
necessary adjustment can be made with a
spanner. Accurate levelling prevents vibra-
tion, noise and displacement of the machine
during operation.
Caution! Never place cardboard, wood
or similar materials under the machine to
compensate for any unevenness in the
floor.
Water inlet
Warning! This appliance must be
connected to a cold water supply.
1. Connect the water inlet hose supplied
with the machine to a tap with a 3/4"
thread. Always use the hose supplied
with the appliance.
If necessary, use the suitable or supplied
restrictor (1/2”).
electrolux 19
To Next Page
Loading...
