By selecting this option the water of the
last rinse is not emptied out to prevent
the fabrics from creasing. When the
programme has finished, the lights D and
E are lit to indicate that the water must
be emptied out (See: 'At the end of the
programme').
No Spin 0
By selecting this option all the spinning
phases are excluded. To be used for
extremely delicate material. The machine
will add some additional rinses to the
cotton and synthetic programmes.
For the maximum spin speed allowed by
each programme, refer to the chapter
'Programme Chart'.
10.5 Select the Zeit Sparen/
Gain de temps options
Before you start the programme you can
decrease the programme duration. Use
this option for items with daily soil. The
related indicator comes on.
By selecting Super Quick
the
washing time will be reduced approx. 30
minutes for cotton and by 20 minutes for
synthetic. The machine will perform 1
rinse less.
By selecting Quick the washing time
will be reduced approx. 10 minutes. This
option is recommended for lightly soiled
white-/coloured and synthetic laundry.
• You must select this option after you
have set the programme and before
you press button Start/Pause -
Départ/Pause .
• You can cancel or modify the Quick or
Super Quick at any moment, before
you press button Start/Pause -
Départ/Pause
.
10.6 Select the desired options
Depending on the programme, different
functions can be combined. These must
be selected after choosing the desired
programme and before pressing the
button Start/Pause - Départ/Pause
.
The relevant light will illuminate.
Zeit
Spar
e
n/
Gain
de
te
mps
Vor
-
wäsche/
Pré-
l
a
vage
E
xtr
a
Spülen/
Rinçage
Plus
L
e
icht-
b
ügeln/
Repas
sage
Facile
If an incorrect option is selected, the
corresponding indicator lamp flashes for
about 2 seconds. For the compatibility of
the options with the washing
programmes, refer to the chapter
'Programme Chart'.
10.7 Starting the programme
To start the selected programme, press
the button Start/Pause - Départ/Pause
; the corresponding pilot light stops
flashing and remains on. On programme
progress display the pilot lights illuminate
to indicate that the appliance starts
operating and the door is locked.
10.8 Altering an option or a
running programme
It is possible to change any option before
the programme carries it out.
Before you make any change, you must
pause the washing machine by pressing
the button Start/Pause - Départ/Pause.
The programme can be changed as long
as the button Start/Pause - Départ/Pause
has not been pressed. Changing a
running programme is possible only by
resetting it. Turn the programme selector
dial to and then to the new
programme position. Start the new
programme by pressing the button Start/
Pause - Départ/Pause again.
10.9 Interrupting a programme
Press the button Start/Pause - Départ/
Pause to interrupt a programme which is
running, the corresponding light starts to
flash. Press the button again to restart
the programme.
www.electrolux.com18
To Next Page
Loading...
