Replace the drawer and run the rinse
programme without any clothes in the
drum.
12.9 Cleaning the inlet hose and the valve filter
1.
2.
3. 4.
12.10 The dangers of freezing
If the machine is exposed to
temperatures below 0°C, certain
precautions should be taken.
• Turn off the water supply.
• Unscrew the inlet hose from the
supply tap.
• Select a wash programme, start the
machine and let the programme run
for a short time.
• Interrupt the programme by turning
the programme selector to
position.
• Place the end of inlet and drain hoses
down low, into the waste gully (floor
drain) set into the floor. Make sure
that the end of the hose does not go
below the water level in the gully's
(drain's) water tap.
• Select the programme "Drain" and let
it run until it is finished.
ENGLISH 23
To Next Page
Loading...
