82
• An incorrect option selection has been made:
this is indicated by the message Err when a
function incompatible with the current programme
is selected.
• An alarm code indicates a fault in the machine
operation (see the relevant chapter).
11 Programme progress display
By selecting the wash programme, the pilot lights
corresponding to the various phases making up the
programme come on.
After the machine has started, only the running
phase pilot light stays on.
●
Voorwassen/Prélavage (prewash): when this
light comes on this means that the machine is
performing the prewashing phase.
●
Wassen/Lavage (washing): when this light
comes on this means that the machine is
performing the washing phase.
●
Spoelen/Rinçage = rinses
●
Centrifugeren/Essorage = spin
●
Einde/Fin = end of programme
When the programme has finished, the “End” light
comes on.
The “End” pilot light flashes in the event of operating
problems. And the relative alarm code appears on
the display.
EE1100
= the machine does not fill
EE2200
= the machine does not empty
EE4400
= the door has not been closed
To eliminate the problem, see paragraph “Something
not working”.
To Next Page
Loading...
