ENGLISH
6 Programme progress display
By selecting the wash programme, the pilot lights
corresponding to the various phases making up the
programme come on.
After the machine has started, only the running
phase pilot light stays on. When the programme has
finished, the end (Fin) pilot light comes on.
The end pilot light flashes in the event of operating
problems:
• 4 flashes = door open
• 2 flashes = the water is not drained
• 1 flash =problem with water draining
To eliminate the problem, see paragraph “Something
not working”.
Programme information
By selecting these programmes, it is possible to
wash normally or lightly soiled cotton fabrics, saving
energy. The washing temperature will be reduced
and the washing duration will be prolonged.
By selecting this programme, it is possible to wash
normally or lightly soiled cotton fabrics.
Fabrics washed with this programme have a washing
efficiency result of AA.
The “Diario” programme at 60° or 40° reduces the
time of washing. To be used for lightly soiled cotton
items.
This programme has to be used for synthetics items
to be iron. The laundry is gently washed and spun to
avoid any creasing.
Sinteticos 40°
Daily (60°/40° Diario)
40°AA
60° ECO - 40° ECO
Prelavado
Lavado
Aclarado
Centrifugado
Fin
With this programme it is possible to rinse and spin
the garments which have been washed by hand.
The machine performs 3 rinses, followed by a final
spin at a maximum speed.
The spin speed can be reduced by depressing
“Centrif.” (spin reduction) button.
The final spin is foreseen only for cotton items as in
the spin programme.
For emptying out the water of the last rinse in
programmes with the “Antiarrugas” (anti-crease)
option.
Turn first the programme selector dial to PARO, then
select programme “drain” and depress the
“Incio/Pausa” button.
Separate spin at the maximum speed for hand
washed garments. You can reduce the speed by
means of “Centrif.” (spin reduction) button to adapt it
to the fabrics to be spun.
Separate short spin at the maximum speed 700 rpm
for hand washed garments. It has to be used for
synthetic, delicate, wool and hand washed items.
To reset a programme turn the selector dial to
PARO. Now a new programme can be selected. On
this position the appliance is off.
PARO = Cancelling/Off
Delicate spin (Centrifugado
Delicado)
Spin (Centrifugado)
Drain (Descarga)
Rinses (Aclarado)
35
132987980GB.qxd 25/02/2005 15:09 Pagina 35
To Next Page
Loading...
