Need help?Do you have a question about the Electrolux EXP09CN1W and is the answer not in the manual?
General| Type | Portable |
|---|---|
| Cooling Capacity | 9000 BTU/h |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R410A |
| Air Flow | 350 m³/h |
| Heating Capacity | Not Applicable |
| Power Consumption (Heating) | Not Applicable |
| Noise Level (Outdoor) | 50 dB (Outdoor) |
| Operating Temperature (Heating) | Not Applicable |
| Dimensions (Outdoor Unit) | 700 x 245 x 540 mm |
| Weight (Outdoor Unit) | 25 kg |
Essential safety guidelines to prevent injury, property damage, and ensure correct operation.
Critical warnings regarding electrical hazards, installation, operation, and misuse of the appliance.
Details the operational modes (Cooling, Heating, Dry, Fan, Auto) and special features like ION and Sleep.
Explains the purpose and operation of each button on the control panel for user interaction.
Defines key temperature parameters (TC, TA, TS, TE) used in electronic control.
Specifies input voltage requirements for the electronic control system.
Details safety mechanisms like compressor delay, sensor protection, and anti-icing.
Outlines operational parameters and valid functions for fan-only mode.
Describes fan and compressor operation logic during cooling mode.
Explains the unit's behavior and conditions for operation in drying mode.
Details how the heater and fan operate based on temperature differences in heating mode.
Lists error codes (E1-E4, P1) and their corresponding sensor or system malfunctions.
Summarizes Timer and Sleep functions for enhanced user convenience and control.
Guides on proper unit placement, window slider kit installation, and exhaust hose setup.
Provides instructions for cleaning filters, unit enclosure, and preparing for long-term storage.
Specific steps for storing the unit when not in use, including draining and drying.
Methods to test compressor continuity, ground fault, and efficiency.
Covers equipment needed and procedures for sealed system repairs and component replacement.
Outlines steps to test the fan motor's functionality and speed control.
Explains how to test run capacitors for the compressor and fan motor.
To Next Page