Why is the suction performance not good on my Electrolux Ventilation Hood?
If your Electrolux Ventilation Hood isn't performing well, it might be due to a large distance between the hood and the cooking surface. Refer to page 7, figure and table to readjust the distance. Another potential reason is a dirty metallic anti-grease filter. In this case, you should clean the filters according to the cleaning and maintenance instructions.
What to do if both light and fan do not work on my Electrolux FHWC3 55LS Ventilation Hood?
If both the light and fan on your Electrolux Ventilation Hood aren't working, start by checking the light bulb. Replace it with a bulb of the correct rating if it's broken. Also, there might be a problem with the electrical connection, so consult an electrician to check it.
How to fix excessive vibration in my Electrolux FHWC3 55LS?
Excessive vibration in your Electrolux Ventilation Hood can stem from a few issues. First, ensure the appliance is properly fixed on the brackets; if not, take it down and re-fix it correctly. A damaged fan blade could also be the culprit; in this case, switch off the appliance and have it repaired by qualified service personnel. Lastly, check if the fan motor is tightly fixed.
General| Width | 55 cm |
|---|---|
| Number of Speeds | 3 |
| Lighting | LED |
| Color | Stainless Steel |
| Material | Stainless steel |
| Filter Type | Aluminum grease filter |
| Control type | Mechanical |
To Next Page