Consumption values
Programme
1)
2)
Water (l) Energy (kWh) Duration (min)
Quick 7.9 - 9.7 0.543 - 0.664 30
Pre-rinse 2.8 - 3.4 0.011 - 0.014 15
1h 8.2 - 10 0.628 - 0.767 60
1h 30min 8.5 - 10.4 0.743 - 0.909 90
2h 40min 8.8 - 10.8 0.854 - 1.043 160
ECO 9.9 0.628 240
AUTO Sense 8.0 - 10.5 0.683 - 1.047 120 - 170
Machine Care 7.4 - 8.9 0.396 - 0.484 60
1)
The pressure and the temperature of the water, the variations of the mains supply, the
options, the quantity of dishes and the degree of soil can change the values.
2)
The values for programmes other than ECO are indicative only.
6. BASIC SETTINGS
You can configure the appliance by
changing basic settings according to
your needs.
Number Settings Values
Description
1)
1 Water hard‐
ness
From level 1L
to level 10L
(default: 5L)
Adjust the level of the water softener ac‐
cording to the water hardness in your
area.
2 Rinse aid level From level 0A
to level 8A (de‐
fault: 5A)
Adjust the level of the rinse aid accord‐
ing to the necessary dosage.
3 End sound On
Off (default)
Activate or deactivate the acoustic signal
for the end of a programme.
4 Auto door open On (default)
Off
Activate or deactivate the AirDry.
5 Key tones On (default)
Off
Activate or deactivate the sound of the
buttons when pressed.
6 Latest pro‐
gramme selec‐
tion
On
Off (default)
Enable or disable the automatic selec‐
tion of the most recently used pro‐
gramme and options.
1)
For more details, refer to the information provided in this chapter.
You can change the basic settings in
setting mode.
When the appliance is in setting mode,
the bars of the ECOMETER represent
available settings. For each setting, a
www.electrolux.com10
To Next Page
Loading...
