Electrolux GA60SLVS - Settings

5.2 Information for test
institutes
To receive the necessary information for
conducting performance tests (e.g.
according to EN60436), send an email
to:
info.test@dishwasher-production.com
In your request please include the
product number code (PNC) found on
the rating plate.
For any other questions regarding your
dishwasher please refer to the service
book provided with your appliance.
6. SETTINGS
6.1 Setting list
Settings Values Description
Set MyFavourite List of programmes Set your favourite daily
programme. Refer to spe‐
cific information provided in
this chapter.
AirDry ON
OFF
Set the automatic opening
of the door during the dry‐
ing phase. Refer to specific
information provided in this
chapter.
Factory setting: ON.
Brightness From level 0 to level 9 Adjust the brightness of the
display.
Contrast From level 0 to level 9 Adjust the contrast of the
display.
Water hardness From level 1 to level
10
Adjust the level of the wa‐
ter softener according to
the water hardness in your
area.
Factory setting: level 5.
Rinse aid level From level 0 to level 6
Level 0 = no release
of rinse aid
Adjust the released quanti‐
ty of the rinse aid accord‐
ing to the required dosage.
Factory setting: level 4.
Languages List of languages Set the preferred language.
Default language: English.
Display on floor List of colours
None
Set the colour of the Time‐
Beam or deactivate the
TimeBeam.
Reset settings Reset
Cancel
Reset the appliance to the
factory settings.
www.electrolux.com10