57
How to set the minute
minder function
You can use the timer as a simple minute
minder when none of the burners are
operating.
The hob must be activated in order to use
the timer as a minute minder.
Proceed as follows:
1. If necessary, activate the hob by
touching the main ON/OFF Control
for about 3 seconds.
2. Touch the Timer Control to activate
the timer.
3. Touch the Increasing or Decreasing
Control to set the required time (max.
time: 99 minutes).
4. The timer begins the countdown a few
seconds after the time has been set.
5. During the last ten seconds, the timer
starts beeping to advise that the timed
period is about to end.
6. An acoustic signal sounds at the end of
the timed period. To stop the acoustic
signal, touch the Timer Control .
To adjust the time setting:
1. Touch the Increasing or Decreasing
Control or at any time to adjust the
minute minder setting.
To cancel the time setting:
1. Touch the Decreasing Control to set
the minute minder to zero.
"
To Next Page
Loading...
Need help?
General
