To Next PageTo Next Page
Need help?Do you have a question about the Electrolux GWH 11 NanoPlus EU and is the answer not in the manual?
General| Brand | Electrolux |
|---|---|
| Model | GWH 11 NanoPlus EU |
| Category | Water Heater |
| Language | English |
Details terms for exercising quality guarantee in the country of purchase and contacting the agent.
Information on proper packing and allowable temperatures for transport and storage.
Heater compliance with CE standard and relevant directives for gas installation.
Guidance on annual repair and maintenance by authorized professionals.
Explanation of symbols indicating potential dangers, warnings, and references.
Steps to take in case of gas smell, including immediate actions and reporting.
Warning to keep away from flammable and combustible materials during operation.
Instructions for safe operation to avoid fatal toxication accidents.
Critical warnings against unauthorized repair and use of non-original spare parts.
Requirement for consultation with professionals for any constructive modifications.
Automatic ignition process and steps for re-ignition if no flame is generated.
How to adjust gas circulation for power and water temperature using control knobs.
Steps for conserving the heater during long periods of non-use to prevent freezing.
Procedure for flame failure and explanation of the anti-blockage function.
Details on the GWH series, including model names and their technical compliance.
Step-by-step guide for installing the heater, including casing and connections.
Diagram and requirements for maintaining minimum distances for safe installation.
General requirements for heater installation, emphasizing professional execution and local regulations.
Instructions for installing the gas supply pipe, including sealing valves and reductors.
Guidance on connecting cold and hot water pipes, including sealing valves and bending radius.
Requirements for exhaust pipe installation, including material, orientation, and fire resistance.
Steps for performing trial running by professionals, including checks on installation and operation.
Guidelines for maintenance, emphasizing annual service and the use of original spare parts.
Instructions on how to open the heater casing for maintenance and repair.
Specific advice for maintaining butane facilities, including hosepipe replacement.
Troubleshooting steps for no flame, covering gas types, air feed, and battery issues.
Solutions for low water temperature, no hot water, and flame going out during operation.
Details on models, CE-Pin, appliance type, ignition, gas category, and pressure.
Specifications for heat input, output, gas consumption, and water pressure.
Information on pipe connections, flue gas diameter, temperature, dimensions, and weight.
Details on nozzle diameter and quantity for different models.
ERP data, declared load profile, energy efficiency class, and consumption figures.
Diagrams and specific measurements (A-H) for both GWH models.
Forms for recording maintenance details, including personnel and company stamp/signature.
Section for populating model, serial number, date of sale, and seller seal.
