To Next PageTo Next Page
Need help?Do you have a question about the Electrolux IC4 4825LF and is the answer not in the manual?
Essential safety guidelines for operating the ironer and handling materials properly.
Identifies and explains the components of the dryer-ironer control panel.
Details how to use the emergency stop button and release it correctly.
Step-by-step guide for operating the ironer, including startup and safety.
Explains the controls and indicators of the feeder system.
Explains how to select and use the automatic operating mode and its indicators.
Details how to select and operate the machine in manual mode.
Overview of the feeding system and its operational modes.
Steps for operating the ironer with both automatic feeding and folding.
Usage recommendations for manual mode and general precautions.
Instructions for safely shutting down the ironer, considering component protection.
Essential safety warnings regarding electrical power, earthing, and mechanical hazards.
Warning about the high temperature of the ironing cylinder after use.
Procedure for locking and tagging the machine during maintenance for safety.
Description of various safety mechanisms integrated into the machine.
Daily checks, temperature display, steam usage, and fire-related risks.
Troubleshooting guide for problems with the machine's heating system.
Addresses overheating on the sides of the cylinder due to uneven usage.
Solves overheating in the cylinder center from frequent lateral feeding.
Procedure for checking and resetting triggered emergency stop buttons.
Daily checks and tasks to perform at the beginning of each working day.
Weekly cleaning and inspection tasks for the ironer.
Daily, weekly, and monthly maintenance tasks specific to the feeder system.
Step-by-step guide for replacing the ironing bands, including tensioning.
Essential safety guidelines for operating the ironer and handling materials properly.
Identifies and explains the components of the dryer-ironer control panel.
Details how to use the emergency stop button and release it correctly.
Step-by-step guide for operating the ironer, including startup and safety.
Explains the controls and indicators of the feeder system.
Explains how to select and use the automatic operating mode and its indicators.
Details how to select and operate the machine in manual mode.
Overview of the feeding system and its operational modes.
Steps for operating the ironer with both automatic feeding and folding.
Usage recommendations for manual mode and general precautions.
Instructions for safely shutting down the ironer, considering component protection.
Essential safety warnings regarding electrical power, earthing, and mechanical hazards.
Warning about the high temperature of the ironing cylinder after use.
Procedure for locking and tagging the machine during maintenance for safety.
Description of various safety mechanisms integrated into the machine.
Daily checks, temperature display, steam usage, and fire-related risks.
Troubleshooting guide for problems with the machine's heating system.
Addresses overheating on the sides of the cylinder due to uneven usage.
Solves overheating in the cylinder center from frequent lateral feeding.
Procedure for checking and resetting triggered emergency stop buttons.
Daily checks and tasks to perform at the beginning of each working day.
Weekly cleaning and inspection tasks for the ironer.
Daily, weekly, and monthly maintenance tasks specific to the feeder system.
Step-by-step guide for replacing the ironing bands, including tensioning.
General| Model | IC4 4825LF |
|---|---|
| Category | Iron |
| Power | 2400 W |
| Water Tank Capacity | 300 ml |
| Soleplate Material | Ceramic |
| Steam Output | 45 g/min |
| Vertical Steam | Yes |
| Self-Cleaning Function | Yes |
| Anti-Drip System | Yes |
| Auto Shut-off | Yes |
| Cord Length | 2.5 m |
