BBaassiicc IInnffoorrmmaattiioonn
1-17
CChhaannggiinngg tthhee GGrriinnddeerr SSeettttiinngg WWaarrnniinngg
With the main programming menu accessed, push the
UUPP
or
DDOOWWNN
button repeatedly until “Grinder Setting”
appears on the display.
1. Push the
MMEENNUU
button.
2. To adjust the amount of drinks prepared before the “Grinder Setting” message appears on the display, push the
UP or DOWN buttons. The factory recommended setting is the default setting of 0 (off).
3. Push the
SSEETT
button to exit to the main menu.
4. Push
UUPP
or
DDOOWWNN
repeatedly to select another feature to change or close the front panel door to exit the main
programming menu.
CChhaannggiinngg tthhee WWaatteerr FFiillt
teerr WWaarrnniinngg
If a water filter is installed to lower the hardness of the water supplied to your coffee maker, the user can program
the system to warn you when the filter cartridge needs to be changed. Check the manufacturer instructions for the
filter cartridge capacity. Enter the filter capacity into the coffee maker in liters (3.8 liters = 1 gallon).
1. With the main programming menu accessed, push the
UUPP
or
DDOOWWNN
button repeatedly until “Water Filter”
appears on the display.
2. Push the
MMEENNUU
button.
3. To adjust the number of liters used by the coffee maker before the “Water Filter” message appears on the dis-
play, push the
UUPP
or
DDOOWWNN
buttons.
4. Push the
SSEETT
button to exit to the main menu.
5. Push
UUPP
or
DDOOWWNN
repeatedly to select another feature to change or close the front panel door to exit the main
programming menu.
To Next Page
Loading...
