To Next Page
E
Eric JonesAug 8, 2025
How to fix Electrolux Hob when there is no spark?
- KKaren DorseyAug 8, 2025
If the Electrolux Hob fails to spark, first, check that it's properly connected to the electrical supply. If the connection is correct, inspect the fuse and replace it if necessary. If the fuse blows repeatedly, consult a qualified electrician. Also, ensure the burner cap and crown are correctly placed. If the issue persists, after lighting the flame, hold the knob down for approximately 10 seconds to allow the thermocouple to heat sufficiently. Lastly, ensure that the injector isn't blocked and the burner crown is clean.
General
