EN -23-
TRANSPORTATION AND CHANGING OF
INSTALLATION POSITION
Transportation and Changing Positioning
• The original packaging and foam may be kept for re-transportation (optional).
• Faen your appliance with thick packaging, bands or rong cords and follow the
inructions for transportation on the packaging.
• Remove all movable parts (shelves, accessories, vegetable bins, and so on) or x them
into the appliance again shocks using bands when re-positioning or transporting.
Always carry your appliance in the upright
position.
PART - 5.
Repositioning the Door
• It is not possible to change the opening direction of your appliance door if door handles
are inalled on the front surface of the appliance door.
• It is possible to change the opening direction of the door on models without handles.
• If the door-opening direction of your appliance can be changed, contact the neare
Authorised Service Centre to change the opening direction.
BEFORE CALLING YOUR AFTER SALES SERVICE PART - 6.
Errors
Your fridge will warn you if the temperatures for the cooler and freezer are at improper levels
or if a problem occurs with the appliance. Warning codes are displayed in the freezer and
cooler indicators.
ERROR TYPE MEANING WHY WHAT TO DO
E01
Sensor warning
Call Service for assistance as
soon as possible.
E02
E03
E06
E07
E08
Low Voltage
Warning
Power supply to the
device has dropped to
below 170 V.
- This is not a device failure, this
error helps to prevent damages
to the compressor.
- The voltage needs to be
increased back to required
levels
If this warning continues an
authorised technician needs to be
contacted.
To Next Page
Loading...
Need help?
General
