Why is no water coming out of my Electrolux Water Filtration System?
If no water is coming out of your Electrolux Water Filtration System, first, check if the tap or water supply is closed and open it. Also, ensure that the filter is correctly fitted. Low water pressure could also be the cause; make sure the water pressure is above 4 mca (39 kPa). If you have the PA31G model, check and replace the UV lamp if necessary.
What to do if my Electrolux Water Filtration System water has odor or taste?
If the water from your Electrolux Water Filtration System has an odor or taste, it could be due to several reasons. If the product hasn't been used for more than 3 days, dispose of approximately 5 liters from each tank (ice-cold and natural) before consuming the water again. The odor might also be coming from the product's water pipe, in which case you should clean the product as instructed. Finally, the appliance may be indicating the need for filter replacement, so replace the filter.
What to do if I notice water leakage in Electrolux Water Filtration Systems?
If you notice water leakage from your Electrolux Water Filtration System, first check that all the appliance's water pipe connections have been properly secured. If the connections are secure and the leakage persists, the connectors or hose may be damaged.
Ensures children are kept away from the appliance and packaging materials.
Provides critical safety information regarding voltage, power cord use, and repairs.
Details on connecting the water supply tap and hose for operation.
Guide on how to install the water filter, including connecting and resetting.
Instructions for replacing the water filter and UV lamp.
Provides a table of common problems, their causes, and recommended corrections.
General| Brand | Electrolux |
|---|---|
| Model | PA21G |
| Category | Water Filtration Systems |
| Language | English |
To Next Page
