Need help?Do you have a question about the Electrolux R51K/BGE and is the answer not in the manual?
General| Brand | Electrolux |
|---|---|
| Model | R51K/BGE |
| Category | Remote Control |
| Language | English |
Decrease indoor temperature or adjust TIMER counter-clockwise.
Select operation modes: AUTO, COOL, DRY, HEAT, FAN.
Push to change the louver angle.
Push to enter Energy-Saving operation mode.
Cancel all current settings and return to initial state.
Clear or activate the digit display on the AC unit.
Increase indoor temperature or adjust TIMER clockwise.
Set fan speed through AUTO, LOW, MED, HIGH sequence.
Push to start or stop the unit operation.
Preset the time for unit to turn ON and turn OFF.
Push to cancel any TIMER settings.
Lock current settings; push again to release.
Steps to cancel former settings and set the timer to start operation.
Steps to cancel former settings and set the timer to stop operation.
Steps to set both the starting and stopping times for the unit.
Lights when remote controller transmits signals to the indoor unit.
Shows current operation modes: AUTO, COOL, DRY, HEAT.
Shows the settings of the TIMER (ON, OFF, or ON-OFF).
Lights up when the FAN button is pushed.
Shows temperature and TIMER settings.
Instructions for installing and replacing the remote controller's batteries.
Steps to operate the air conditioner in automatic mode.
To Next Page
