Why is my Electrolux Refine 700 Iron not producing steam?
Your Electrolux Iron might not be producing steam because the water tank is not filled enough. Make sure to fill the water tank. Also, the selected temperature might be too low for steam. Increase the temperature to at least the “Cotton” setting.
How to fix Electrolux Iron soleplate not heating?
If the soleplate of your Electrolux Iron isn't heating, first check the main power supply cable, plug, and outlet for any connection issues. Also, ensure that the temperature control isn't set to the “Outdoor” position; select a higher programme like “Cotton”.
What to do if Electrolux Refine 700 Iron leaks water during ironing?
If your Electrolux Iron leaks water from the soleplate while ironing, it might not be hot enough. Select the Cotton setting (from “Cotton” to maximum) suitable for steam ironing. Put the iron on its heel and wait until the headlight is on before you start ironing.
Why does my Electrolux Refine 700 Iron leave brown streaks on linen?
Brown streaks from your Electrolux Iron can be due to several reasons. You may have used chemical descaling agents different from the recommendation, so it is recommended to exchange the Soft Water Activator according to the indications. Fabric fibers might have accumulated in the holes of the soleplate and are burning, so clean the soleplate with a damp soft cloth. Also, fabrics might not be properly rinsed or the garments are new and have not been washed before ironing, so please rinse the fabrics properly before ironing.
How to troubleshoot Electrolux Refine 700 steam jet not working?
If the steam jet function on your Electrolux Iron isn't working, it could be because it was used too frequently in a short period. Put the iron in a horizontal position and wait before using the steam jet function again. Also, the iron might not be hot enough. Adjust the temperature to steam ironing (up to “Cotton”). Put the iron in a vertical position and wait until the temperature indicator light turns off.
Why does my Electrolux Refine 700 leak water after storage?
If your Electrolux Iron leaks water while cooling down or after being stored, it's likely because it was put in a horizontal position with water still in the tank. Empty the water tank to prevent this.
What causes flakes from Electrolux Refine 700 Iron during ironing?
Flakes and impurities coming from the soleplate of your Electrolux Iron are likely due to using hard water, which causes scale flakes to develop in the water tank. Clean the iron according to the Cleaning section.
Prepare the appliance, clean the anti-calc cartridge, and fill the water tank correctly.
Connect to power, select program, and understand the operational indicator lights.
Unlock the iron, test for residues, and activate steam function using the boost button.
Turn off the appliance, allow it to cool, empty the water tank, and store securely.
Empty the boiler, descale with recommended agent, rinse thoroughly, and leave some water inside.
Clean the appliance exterior with a damp cloth; use mild cleaner for stubborn stains.
Prepare the appliance, clean the anti-calc cartridge, and fill the water tank correctly.
Connect to power, select program, and understand the operational indicator lights.
Unlock the iron, test for residues, and activate steam function using the boost button.
Turn off the appliance, allow it to cool, empty the water tank, and store securely.
Empty the boiler, descale with recommended agent, rinse thoroughly, and leave some water inside.
Clean the appliance exterior with a damp cloth; use mild cleaner for stubborn stains.
General| Brand | Electrolux |
|---|---|
| Model | Refine 700 |
| Category | Iron |
| Language | English |
To Next Page