Problem Possible cause Remedy
There is no
drum light
Defective drum lamp. Contact the service centre to re‐
place the drum lamp.
Unexpected
duration time
appears on the
display.
The drying duration is calculated
according to load size and
dampness.
This is automated - the appli‐
ance is working correctly.
A programme
is inactive.
The water container is full. Drain the water container, push
the Start/Pause button.
2)
The drying cy‐
cle is too short.
The load size is small. Select a time programme. The
time value must be related to the
load. To dry one item or a small
amount of laundry we recom‐
mend short drying times.
The laundry is too dry. Select an appropriate time pro‐
gramme or a higher dryness lev‐
el (e.g.
extra dry (Extratrock‐
en)
)
Drying cycle
too long
5)
The filter is clogged. Clean the filter.
The load is too large. Do not exceed the maximum
load size.
The laundry was not spun suffi‐
ciently.
Spin the laundry well in the
washing machine.
Too low or too high room tem‐
perature - this is not the appli‐
ance malfunction.
Ensure a room temperature
higher than +5°C and lower than
+35°C. Optimal room tempera‐
ture to achieve best drying re‐
sults is between 18°-25°C.
1)
Follow the programme description — see the PROGRAMMES chapter .
2)
See the
CARE AND CLEANING
chapter.
3)
Only dryers with the Dryness (Trockengrad) option.
4)
See the HINTS AND TIPS chapter .
5)
Note: After a maximum of 6 hours the drying cycle ends automatically.
11.3 Possible causes of
unsatisfactory drying results:
• The filter is clogged. Clogged filter
makes drying inefficient.
• The airflow slots are clogged.
• The drum is dirty.
• Inadequate default dryness level
settings. See chapter
Adjustment of
default dryness level
• Room temperature is too low or too
high. Optimal room temperature is
between 18°-25°C.
www.electrolux.com24
To Next Page
Loading...
