EasyManua.ls Logo

Electrolux TWSL5E300 - Drying Cycle Too Short; Drying Cycle Too Long; Steam Program Start Failure

Electrolux TWSL5E300
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Problem
1)
Possible cause Remedy
Not possible to
select an op‐
tion. Acoustic
signal is emit‐
ted.
The option you tried to select is
not available for the selected
program.
Turn the tumble dryer off and on.
Change the program or option
as required.
No drum light
Defective drum lamp. Contact the service centre to re‐
place the drum lamp.
Unexpected
duration time
on the display.
The drying duration is calculated
according to load size and
dampness.
This is automated — the appli‐
ance is working correctly.
Program inac‐
tive.
The water container is full. Drain the water container, push
the Start/Pause button.
3)
Drying cycle
too short.
Load size is small. Select time program. The time
value must be related to the
load. To dry 1 item or a small
amount of laundry we recom‐
mend short drying times.
The laundry is too dry. Select time program or higher
dryness level (e.g.
extra dry
(Extratrocken)
)
Drying cycle
too long
6)
The filter is clogged. Clean the filter.
The load is too large. Do not exceed the maximum
load size.
The laundry was not spun suffi‐
ciently.
Spin the laundry well.
Too low or too high room tem‐
perature - this is not the appli‐
ance malfunction.
Ensure a room temperature
higher than +5°C and lower than
+35°C. Optimal room tempera‐
ture to achieve best drying re‐
sults is between 19°-24°C.
Steam function
Steam program
does not start.
There is no water in the contain‐
er for the steam system. Indica‐
tor is on.
Fill the container with the distil‐
led or demineralized water.
www.electrolux.com24

Related product manuals